Emerson Rosemount Wireless WT210 Quick Start Manual page 13

Corrosion transmitters

Hide thumbs Also See for Rosemount Wireless WT210:

October 2023

3. Push sliders to their maximum extension. Ensure they are at

their maximum extension.

4. Undo the 2 x M6 strap hold plate bolts on empty side, such

that the strap can be fed between the strap holder and

the strap holder plate. The slides need to be held at their

maximum extension. Feed the strap between the strap holder

and the strap holder plate. Pulling the strap tight, align the 3

pins of the strap holder with three holes on the strap.

Mark & Cut (with tinsnips):

Quick Start Guide

Table of Contents