Emerson Rosemount Wireless WT210 Quick Start Manual page 12

Quick Start Guide
2. Place sensor bed assembly onto pipe in desired ensuring that
the window in the center of the mount is over the area of the
surface which has been prepared.
12
e. Then feed the end into the return hole of the cable lock.
f. Adjust the position of the cable lock to minimize the
slack in the lanyard cable.
g. Fit the second lanyard at the other end of the mount by
repeating steps 1a to 1g.
Need help?
The lanyard wire can be released from the cable lock
by pushing the switch in the directions of the embossed
arrows.
October 2023
Emerson.com/Rosemount