Emerson Rosemount Wireless WT210 Quick Start Manual page 18

Quick Start Guide
Before proceeding to the next step ensure that the tension
has been removed from the strap by following the steps
above as not removing the tension before cutting the strap
can lead to injury.
4. Once the tension has been removed from the strap, the next
step is to cut the strap.
5. The lanyards can now be removed by pushing the switch on
the in the direction of the embossed arrows on the lanyard
lock..
6. Once the lanyards have been removed, the mount can be
removed from the asset and relocated as necessary.
7. Once the mount has had time to cool, the strap holder bolts
can be removed so that the cut strap can be removed and
discarded as per site rules.
8. Once the mount has cooled, apply anti-seize to all of the
moving parts of the mount in particular the tensioner bolts.
9. For re-installation, please refer to
follow the steps as detailed.
Note
When remounting the universal mount, a replacement strap will
need to be purchased prior to re-installation (part number for
replacement strap can be found in the Universal Mount for
Rosemount
Sheet).
18
WARNING
™
Wireless WT210 Corrosion Transmitters
Strap mount installation
Product Data
Emerson.com/Rosemount
October 2023
and