Safety Warnings - Ferroli EGEA TECH 200 HT Manual

1.

SAFETY WARNINGS

Read carefully before installing
and using the device.
ATTENTION
The manual must be kept for future
reference until dismantling.
OBLIGATION
The manual is provided in paper format;
however, it is available in digital version,
which can be downloaded from the website
www.ferroli.com by selecting the pur­
chased product.
Any
equipment must be performed by
qualified personnel. Exclusively
for interventions on the refrige­
ration circuit, including disposal,
ATTENTION
the personnel must be equip­
ped with a suitable refrigeration
technician's license aimed at the
R290
knowledge and management of
systems containing gases of the
HFC type.
The unit can be used by children
aged 8 years and over and by
persons with reduced physical,
sensory or mental capacities, or
lacking in experience or the nec­
essary knowledge, provided they
ATTENTION
are supervised or have received
instructions regarding safe use
of the unit and understand the re­
lated hazards.
Children must not play with the
device.
Cleaning and maintenance op­
erations, which can be carried
out by the user, must not be per­
ATTENTION
formed by children without su­
pervision.
EN
130
intervention on
cod. 3540000420 - Rev. 03 - 09/2023
EGEA TECH
ATTENTION
ATTENTION
the
ATTENTION
ATTENZIONE
ATTENZIONE
200 HT - 260 HT
Before carrying out any type of
intervention on the equipment,
the personnel in charge of main­
tenance must refer to what is re­
ported in this manual in the fol­
lowing chapters and in particular
in the chapter "10. REQUIRE­
MENTS FOR THE OPERATION,
SERVICE AND INSTALLATION"
on page 184.
During the design and construc­
tion phase of the systems, local
rules and regulations must be
complied with.
The equipment must be installed
and operated by a qualified tech­
nician in accordance with local
health and safety legislation and
regulations.
For equipment installation oper­
ations, refer to par. "8.4 PREPA­
RATION OF THE INSTALLATION
SITE" on page 169 and par. "8.5
FLOOR FIXING" on page 170.
This product is designed to be
used at a maximum altitude of
2000m.
A suitable protection grille must
be installed at the air inlet and
outlet connections, in order to
prevent foreign bodies from en­
tering the equipment.
See description and figures in
"8.6 AERAULIC CONNECTIONS"
on page 171