Ferroli EGEA TECH 200 HT Manual page 129

EGEA TECH
Dear Customer,
thank you for choosing a FERROLI product.
Our company, always attentive to environmental issues, uses
low environmental impact technologies and materials for its
products, in compliance with EU WEEE standards (2012/19/
EU – RoHS 2011/65/EU).
Read this instruction manual careful­
ly before using the device and store
it carefully.
OBLIGATION
In the event of a change in ownership
of the device, deliver it to the next
user/owner.
In the event of loss of or damage to this manual, another copy
can be downloaded from the website www.ferroli.com by se-
lecting the purchased product.
The images are for illustrative purpose only and do not consti-
tute a commitment for the manufacturer and/or the Distributor.
200 HT - 260 HT
cod. 3540000420 - Rev. 03 - 09/2023
Translation of the original language of the Manufacturer.
KEEP FOR FUTURE CONSULTATION.
MANUFACTURER'S DATA
FERROLI S.p.A.
via Ritonda 78/a
37047 San Bonifacio (VR) - ITALY
Tel: +39 045 6139411
Fax: +39 045 6100933
www.ferroli.com
TECHNICAL ASSISTANCE DATA
For any request for TECHNICAL ASSISTANCE on the ma-
chine, refer to the following contacts.
For the service centre, visit:
www.ferroli.com
DEVICE IDENTIFICATION
This equipment is a 1.9 kW heat pump for heating domestic hot
water available in versions with 200 and 260 liter tanks and can
be prepared with integration from a solar heating panel.
Version Configuration description
200 HT
Air source heat pump for the production of domestic
hot water (DHW)
260 HT
CASING PROTECTION RATING
The equipment protection rating is: IP24.
ENGLISH
EN
129