Installing A 2.5-Inch Drive Into A 3.5-Inch Drive Adapter - Dell PowerEdge R360 Installation And Service Manual

Figure 39. Removing a 2.5 inch drive from a 3.5-inch drive adapter
Next steps
Install 2.5 inch drive into 3.5 inch

Installing a 2.5-inch drive into a 3.5-inch drive adapter

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2. Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter.
NOTE: If the 2.5-inch drive has a Torx screw, use Torx 6 screwdriver to install the drive to a 3.5-inch drive adapter.
72 Installing and removing system components
adapter.
Safety instructions.
Before working on your system.