Maxxus 4.2 Installation & Operating Manual page 6

Hide thumbs Also See for 4.2:

Table of Contents

Assembly

Carefully unpack all parts of the delivery. Two people are required because some parts of your exercise ma-

chine are bulky and heavy. Before mounting, check the completeness of the mounting hardware (screws, nuts,

etc.) and the components in the parts and fastening materials list on the previous pages of this manual.

Carefully carry out the installation, as damage or defects that have arisen due to assembly errors are not

covered by the warranty under any circumstances. Read the instructions carefully before starting, follow the

sequence of the installation steps exactly and follow the instructions for the individual assembly steps. The

installation of the training device must be carried out by responsible adults.

Carry out the installation of your exercise equipment with two adults in a location that is level, clean and free

of obstruction during assembly. Only after assembly of the training device has been completed can training be

started.

Step 1: Mounting the Rear Stand

Attach the rear stand (C) with two 3/8" hexagon head bolts (2), four 3/8" Washers (1), and two 3/8" cap nuts (8)

to the rear mounting of base frame (A)..

Table of Contents

Need help?

Do you have a question about the 4.2 and is the answer not in the manual?