Recovery Function - Maxxus 4.2 Installation & Operating Manual

F.

Recovery function:

Determine the current tness level by measuring the recovery pulse.
1. While the recovery function is in progress, the pulse must be measured by the two hand pulse
sensors. When the pulse is displayed, press the RECOVERY key to start the measurement. Do
not cycle during measurement!
2. A countdown timer runs from "0:60" seconds to "0:00".
3. Ater measurement, the display shows the tness value F1 to F6, where F1 is the best value and
F6 the worst value.
1.0 Outstanding
1.0 < F < 2.0 Very t
2.0 < F < 2.9 Good
3.0 < F < 3.9 Sufcient
4.0 < F < 5.9 Below average
6.0 Poor
Storage compartment for smartphone / tablet PC
There is a storage compartment on the ront o the cockpit which ts most current smartphones and tablet PCs.
Please check beore use i your Samrtphone or Tablet PC ts in the storage compartment securely.
USB port
A USB port is tted on the side o the cckpit. The user can connect a USB charging cable or their smartphone /
tablet PC to charge it as needed. The USB charging cable is not included!
Cockpit
19
ENG