Adding Text After Stored Text - Panasonic RK-T25 Operating Instructions Manual

Chapter 1
Adding text after stored text
Additional text may be entered with the text in file 1.
1 Press the TEXT IN/OUT
Key to enter the Text
Memory Mode.
TEXT MODE
TEXT # ?
4 When the RELOC Key is
pressed, the cursor moves
to the end of the text line
and the words at the end
of the last line appear on
the LCD Display.
forn letters.
2 Press the 1 Key to select
file 1.
RETURN
I 1
5 Press the RETURN Key
and then enter the follow-
ing text.
SELECT MARGIN
1 : CURRENT
STORED
With text memory, you're open to an assortment of Q D
applications previously available only in more G,zi
expensive wordprocessing packages. G S
o r
3 Press the 1 or 2 Key to
select the margins.
TEXT I N / O U T
:...! l..11...i:...::...: !...!:...::...! i—t:...::...::...: l~l
Upon completion of the
text entry, press the
TEXT IN/OUT Key to
exit from the Text Mem-
ory Mode.
TEXT MODE END
• T h e new text is stored at
the end of the text pre-
viously stored in file 1.