Panasonic RK-T25 Operating Instructions Manual page 4

Chapter 1
b . Names and Operation of
the Main Parts
Paper Support
Paper Bail
This is used to hold the paper down.
Platen •
Paper Release Lever
This lever is used to release the paper.
Pull this lever towards you to adjust the
paper position, and then move it back
to lock the paper.
When you pull the Paper Release Lever
toward you, the Paper Bail Lever will
also move away from the Platen.
Carriage
The Ribbon Cassettes, the
Correction Tape and the
Cupwheel Print Element
are installed on the Car-
riage. This mechanism
moves to the left and right
for printing, erasing, etc.
when the keyboard keys
are pressed.
Accessories (included)
•Cupwheel Print Element
•Correctable Film Ribbon Cassette
(RP-T132)
Lift-Off Correction Tape
(RP-T131)
O
z
(j)
D
W
cc
o
LI.
Ill
m
• AC Adaptor
(RP-K942)
• Dust Cover
LCD Display »
Platen Knob
This is used to manually feed the paper up or down.
By pressing the Platen Knob inward you can rotate the
Platen in small increments.
Refer to page 17.
• Paper Bail Lever
When this lever is pulled towards you, the Paper Bail will
move away from the Platen. This allows the paper to easily
inserted and positioned for typing.
• Pitch Scale
Three pitch graduations, 10, 12, and 15, are provided. Use
these graduations to set the margins or tabs.
LCD Contrast Adjustor
(CONTRAST)
This is used to adjust the contrast of the
LCD Display.
External Power Input Jack
[DC IN 15 V (©-§>-©)]
This unit can be connected to the AC
Adaptor (RP-K942, included) to enable
it to be powered with household A C
power.
Refer to pages 8 to 10.
Ni-Cd Rechargeable Battery Compartment
Refer to pages 8 to 10.
Bottom Cover
By sliding this lid to the right, it
can be removed to exchange the
Cupwheel Print Element.
Refer to pages 12 and 13.
• Power Switch ( O N / l - O F F / o )
Refer to page 11.
v
• Interface Connector
You can use this unit as a printer by connecting
the optional Interface Adaptor RP-K100 and
receive data from a Computer.
Refer to page 48.