Panasonic RK-T25 Operating Instructions Manual page 3

NAMES AND OPERATION
OF THE PARTS
• It's a good idea to keep these
Operating Instructions open at
this page when using the unit.
a.
CD
m
n
O
X I
m
c
CO
z
O
Names and Operation of the
Function Keys
Margin Release K e y *
(MAR REL)
The left or right margin is released
temporarily
Refer to page 22.
Left Margin Set Key
(L MAR)
Refer to page 21.
Right Margin Set Key
(R MAR)
Refer to page 21.
Tab Set Key
(TAB SET)
Refer to page 21.
Tab Clear Key
(TAB CLR)
Refer to page 22
Shift Lock Key and Shift
Indicator ( L O C K ) *
Press this key to lock the
keyboard in the shifted
condition.
Press the SHIFT Key to
cancel the shift lock.
•Shift Indicator
This indicator lights in the
shifted condition.
Shift Key (SHIFT) • -
- • T a b Key (TAB)
The carriage moves to the next
tab position.
Refer to page 22.
f Print ON/OFF Key (PRINT ON/OFF)
This key is used to start or stop the printout of
the text stored in the Text Memory.
Refer to pages 36 to 47.
When a character key is pressed
while this key is being pressed,
the capital letter or the symbol
shown on the top part of the key
will be printed.
Dust Cover
To use the unit, first
remove the Dust Cover, as
shown in the figure.
•Space Bar
The carriage moves by one space
to the right.
If you press the Space Bar when
the unit is in the Underlined Print-
ing Mode, the underline will be
printed.
• R e p e a t Key (REPEAT)
The key pressed immediately before this key is
repeated.
• Code Key (CODE)
The CODE Key is used in combination with other keys to
modify their functions. Make sure the CODE Key is held
down when pressing the other key.
^ - • T e x t IN/OUT Key
(TEXT IN/OUT)
This key is used for entering into the Text
Memory Mode or for exiting from the Text
Memory Mode.
Refer to pages 36 to 47.
« B a c k Space Key
[BACK SPACE ( • ) ]
The carriage or the cursor on the
LCD Display will move one charac-
ter to the left.
- • Forward Key [FWD ( • ) ]
The cursor on the LCD Display
will move one character to the
right.
When the unit is in the Typewriter
(TPWR) Mode, the carriage will
move one space to the right.
•Delete Key (<Xj)
This key is used to delete printed
characters or characters on the
LCD Display.
Refer to pages 23 and 24.
• Return Key (RETURN)
The carriage moves to the left margin
position of the next line.
Shift Key (SHIFT)
Relocation Key (RELOC)
The carriage moves to the end of the line.
-•Express Back Space Key (EXP)
This key is used to return the carriage to the
left margin without a line feed.