S
S
ERVICE AND
UPPORT
Accessories and Documentation
NOTE
Accessories and
Documentation
Clamping Plate
Connecting Cables
26
UX 410 I
NSTALLATION
•
You will be issued MRA number(s) and the fax will be returned to you.
One MRA number must be issued for each unit you return to Verifone, even if
you are returning several of the same model.
5
Describe the problem(s) and provide the shipping address where the repaired
or replacement unit must be returned.
6
Keep a record of the following items:
•
Assigned MRA number(s).
•
Verifone serial number assigned to the unit you are returning for service or
repair (serial numbers are located on the side of the unit, see
•
Shipping documentation, such as air bill numbers used to trace the
shipment.
•
Model(s) returned (model numbers are located on the Verifone label on the
side of the Controller unit).
Figure 13
Information Label on Left Side of Controller Unit
Verifone produces accessories and documentation for the contactless reader.
When ordering, please refer to the part number in the left column.
Verifone Online Store at www.store.verifone.com
•
USA – Verifone Customer Development Center, 1-800-834-4366,
Monday - Friday, 7 A.M. - 8 P.M., eastern time.
•
International – Contact your Verifone representative.
Use the following clamping plate to mount the antenna unit:
PPL159-417-01-A
Use the following cables to connect the antenna unit to the controller unit
your local Verifone distributor to determine which cable fits your needs:
CBL000-045-01-A
CBL159-314-01-A
G
UIDE
EVA-Clamp plate
USB Type A to B cable, 1 m long.
RJ45 to RJ45 connector, I2C MOD10M UX 410, 0.8 m long.
Figure
MODEL AND
SERIAL NUMBERS
Contact
.
13).