Table of Contents
Advertisement
2.
Safety precautions
If the product is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the
product may also be damaged. Always use the product according to this instruction manual.
The following symbols are used in this instruction manual.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be
used to alert against unsafe practices or potential material damage.
NOTE:
Indicates a potential situation which, if not avoided, may result in failure of this instrument.
TIP:
Indicates the useful knowledge or information for use.
2.1 Laser safety
CAUTION:
Never peel off the warning label.
This product is specified as CLASS 1 laser product.
CLASS 1 LASER PRODUCT (IEC60825-1:2007 / IEC60825-1:2014)
This product complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described
in Laser Notice No. 56, dated May 8,2019.
Do not remove the cover.
It is very dangerous to remove the cover using a tool as the built-in laser will be accessible. Never remove the cover as it
could also cause failure of the product.
Built-in laser (semiconductor laser)
Wavelength: 780 nm
Maximum power output: 10 mW
Beam divergence: 35°
2.2
CAUTION: Safety precautions
Transportation
When carrying each unit, be careful not to drop it.
If the unit falls, your foot, etc. may get injured.
2.3
WARNING: Prevention of electric shock
Never disassemble any part of this product.
2. Safety precautions
Warning label position: Right side surface of BXC-FSU
2
2.1 Laser safety
Advertisement
Table of Contents
