Table of Contents
Advertisement
7.
Proper selection of the power supply cord
If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to
"Specifications" and "Certified Cord" below:
Caution : In case you use a non-approved power supply cord for our products, we can no longer warrant
the electrical safety of the equipment.
Voltage rating
Current rating
Temperature rating
Length
Fittings configuration
A power supply cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked
with an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of the
agencies listed in Table 1. In case you are unable to buy locally the power supply cord which is approved by one of
the agencies mentioned in Table 1, please use replacements approved by any other equivalent and authorized
agencies in your country.
Country
Argentina
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Ireland
35
7. Proper selection of the power supply cord
Specifications
125 V AC (for 100-120 V AC area) or, 250 V AC (for 220-240 V AC area)
6 A minimum"60 ˚C minimum
3.05 m maximum
Grounding type attachment plug cap. Opposite terminates in molded-on IEC
configuration appliance coupling.
Table 1 Certified cord
Agency
Certification
mark
IRAM
SAA
ÖVE
CEBEC
CSA
DEMKO
FEI
UTE
VDE
NSAI
Country
Agency
Italy
IMQ
Japan
JET
Netherlands
KEMA
Norway
NEMKO
Spain
AEE
Sweden
SEMKO
Switzerland
SEV
United
ASTA
Kingdom
BSI
U.S.A.
UL
Certification
mark
Advertisement
Table of Contents
