Safety Precautions - Olympus U-LGPS Instructions Manual

Led and ldp light source
Table of Contents

Advertisement

Safety precautions

If the product is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the
product may also be damaged. Always use the product according to this instruction manual.
Installation
Secure the space of 5 cm or more around the product.
WARNING
Otherwise, the ventilation route is not secured and the heat is filled inside the product, which may cause a
fire.
Install the product on a sturdy, level table or bench.
CAUTION
For safety in particular, do not place a mat, etc. under the product. Otherwise, the product may overturn.
Laser safety
· Never peel off the warning label.
CAUTION
This product is specified as CLASS 1 laser product.
This product complies with 21 CFR 1040.10 and 1040.11 except for conformance with
IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8,2019.
· Do not remove the cover.
It is very dangerous because the laser beam equivalent to CLASS 4 is emitted. And the product may also be
damaged.
This product uses the fluorescence of the phosphor excited by the laser beam emitted from the LD bank as
TIP
the illumination light.
Specifications of LD bank:
· Dominant wavelength: 455±5 nm
· Output: 36 W
Warning label position: Right side surface of U-LGPS
CLASS 1 LASER PRODUCT (IEC60825-1:2007 / IEC60825-1:2014)
U-LGPS
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents