New Hardware; Mitel Mivoice Business Release 9.1; Mxe Iii-L Controller; Supporting Documentation - Mitel 3300 ICP Hardware Technical Reference Manual

C 1
HAPTER
networks. The 3300 ICP controller provides IP and TDM call processing. The 3300 ICP system may also
include Analog Services Units and peripheral cabinets to provide connectivity for analog and digital trunks
and telephones.

New Hardware

Mitel MiVoice Business Release 9.1

The AX controller now requires a single 16 GB Compact Flash (CF) for the system software, database,
and embedded voice mail, instead of the 2 GB/4 GB CF combo in pre-9.0 release. See
uration for AX.

MXe III-L Controller

The MXe III-L (L = LAN) controller was developed because some hardware parts of the MXe III controller
will no longer be available.
The MXe III-L controller supports MiVoice Business 9.1 and later only. The MXe III-L controller will be
available in Q1, 2020 only for the following regions: North America, UK, Middle East, Africa, Australia, and
New Zealand.
The MXe III-L controller uses the same RTC/E2T compute cards and MMC cards that the MXe III supports
with MiVoice Business 9.1; the performance of the MXe III-L controller is the same as the MXe III
controller.
The MXe III-L controller is different from the MXe III controller in the following ways:
No WAN support
•
No LAN Port 2 support
•
No L2 redundancy
•
No IGMP filtering
•
No 1G Ethernet speed for LAN port
•
If you have to replace your MXe III controller with an MXe III-L controller, follow the instructions in KMS
article S05142.

Supporting Documentation

Refer to Mitel OnLine for Customer Documentation and Knowledge Base Articles.
N H
EW ARDWARE
I
NTRODUCTION
Standard Config-
3