C
2
HAPTER
DSP II MMC
•
Echo Canceller Module
•
Quad CIM (Copper Interface Module) MMC
•
Dual Fiber Interface Module (FIM) MMC
•
4 + 12 port combo card and 24 port ONS card (AX)
•
Dual T1/E1 Framer MMC
•
T1/E1 Combo Card
•
Quad BRI Framer MMC
•
Analog Main Board (AMB)/Analog Option Board (AOB) (CX(i) II controllers only)
•
RAID controller and additional hard drive
•
Redundant power supply
•
AX Controller
The AX controller is ideal where a high density of analog devices is required. There are two typical system
configurations, standalone and networked, although as with any system, these functions may be mixed.
The AX supports up to 48 T1 or 60 E1 on-board digital trunks, up to 112 IP phones, and 288 analog
•
phones (maximum 400 devices).
The AX controller will support a second AC Power Supply Unit.
•
The controller front panel consists of the following components:
AX Controller
Figure 2.1:
AX C
ONTROLLER
3300 ICP C
ONTROLLERS
5