Specifications - Mitel 3300 ICP Hardware Technical Reference Manual

C 2
HAPTER
Fixed A to D gain.
•
Paging (AMB)
The Paging interface supports the following features:
Transformer-coupled front end for audio signal with 600 ohms AC input impedance.
•
DC load (as in an LS trunk) for 3
•
One FORM C relay for 3
•
Paging and answer-back audio path can operate in full duplex mode.
•
Fixed A to D gain and D to A gain.
•

Specifications

ONS Lines
ONS Circuit Impedance Values
Table 2.16:
Territory
NA/LA
UK/EU (except
for France)
France
Australia
New Zealand
China
Brazil
: UK/EU parameters apply to Germany, Italy, Netherlands, Portugal, and Spain.
NOTE
Protected ONS Lines
Protected ONS ports (ONSP) are available on
ports 1 and 2 on the CXi II Controller with AMB Version III
•
ports 1 and 2 on the MXe Controller (PN 50005090) with AMB Version III.
•
The ONSP ports are suitable for off-premise applications, and meet the requirements of 60950-01 and
IEC 55-24. Regular ONS ports are intended for on-premise applications only.
ONSP ports use the same loss plan settings as regular ONS ports.
F U
IELD
rd
party paging unit control.
rd
party paging unit control.
Balance ONS Impedances
Network Setting
(ONS/OPS
Circuit
Assignment
form) AC
600 600 W
Complex 270 W+(750
W||150nF)
Complex 270 W+(750
W||150nF)
Complex 220 W+(820
W||120nF)
Complex 300 W+(1000
W||220nF)
Complex 200 W+(560
W//100nF)
Complex 900 W
R
PGRADEABLE AND EPLACEABLE
Balance
600 W
270 W+(750
W||150nF)
270 W+(750
W||150nF)
220 W+(820
W||120nF)
370 W+(620
W||310nF)
200 W+(560/
W/100nF)
900 W+(50nF)
C M (AX, MX
ONTROLLER ODULES
3300 ICP C
Ringing
frequency
20 Hz
25 Hz
50 Hz
25 Hz
25 Hz
25 Hz
20 Hz
, CX II)
E I
ONTROLLERS
31