C
2
HAPTER
Standard Configuration for CXi II
One 400 MHz MPC8360E processor
•
1 GB of RAM
•
Analog Main Board (AMB) for analog trunks and lines
•
Embedded L2-PoE Ethernet switch with 16 ports (CXi II only)
•
Stratum 3 clock
•
Two 21363 DSPs on main board
•
Mass storage (spinning hard disk drive or solid state drive) is provided in a separately orderable kit. The
kit includes factory-installed Mitel MiVoice Business software.
The standard configuration does not support compression. Compression channels can be added using
the DSP-II card. The DSP II module provides up to 64 G.729 voice compression channels. This module
is also required for T.38 FAX. The DSP II module DOES NOT PROVIDE additional telephone resources
(tone detectors and receivers, voice mail, or conference).
Optional Configuration
You can add
DSP II module for G.729 voice compression and FAX Relay (T.38)
•
One or two T1/E1 Combo cards for digital trunking
•
One or two Quad BRI Framer modules
•
Analog Option Board (AOB)
•
Quad CIM.
•
Dual or Quad DSP modules are supported but not required as the embedded 21363 DSPs provide suffi-
cient telephony resources .
CX II
CX
II C
AND
I
ONTROLLERS
3300 ICP C
ONTROLLERS
13