6.5
Kill switch (150 XC‑W US)
6.6
Horn button (125 XC‑W EU)
6.7
Light switch (125 XC‑W EU)
6.8
Light switch (150 XC‑W US)
The kill switch
1
Possible states
•
Kill switch
circuit is closed and the engine can be started.
•
Kill switch
is interrupted, a running engine stops, and a non-running
engine will not start.
E00316-10
The horn button
Info
The horn button has no function when the vehicle is deliv-
ered.
Possible states
•
Horn button in neutral position
Horn button pressed – The horn is operated in this position.
•
E00318-11
1
Light switch
Possible states
Low beam on – Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on – Light switch is turned to the left.
In this position, the high beam and the tail light are
switched on.
E00321-10
1
The light switch
instrument.
Possible states
Light off – Light switch is pressed in up to the stop. In this
•
position, the light is switched off.
Light on – Light switch is pulled out to the stop. In this posi-
•
tion, the low beam and tail light are switched on.
E00317-10
is fitted on the left side of the handlebar.
in basic position – In this position, the ignition
pressed – In this position, the ignition circuit
1
is fitted on the left side of the handlebar.
is fitted on the left side of the handlebar.
is located to the left of the combination
6 CONTROLS
17