Table of Contents
Advertisement
17 TUNING THE ENGINE
17.10
124
401951-10
Engine characteristic – auxiliary spring
B00056-10
–
A
Clean gear teeth
of the shift lever and shift shaft.
–
Mount the shift lever on the shift shaft in the required position
and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
Mount and tighten screw
Guideline
Screw, shift
M6
lever (125 XC‑W
EU)
Screw, shift
M6
lever (150 XC‑W
US)
The auxiliary spring is located on the right side of the engine
below the water pump cover.
Possible states
Auxiliary spring with green color coding – Auxiliary spring for
•
soft performance.
Auxiliary spring with yellow color coding – Auxiliary spring for
•
more aggressive performance than with a green spring.
Auxiliary spring with blue color coding – Auxiliary spring for
•
more aggressive performance than with a yellow spring.
Auxiliary spring with red color coding – Auxiliary spring for
•
more aggressive performance than with a blue spring.
Auxiliary spring without color coding – Auxiliary spring for
•
progressive performance (at first more aggressive than with
the red spring, then softer than with the red spring).
The engine characteristic can be influenced by different spring
1
strengths of auxiliary spring
Info
The auxiliary spring mounted in the as-delivered state as
well as the additionally available auxiliary springs can differ
depending on model.
1
with washers.
14 Nm (10.3 lbf ft)
Loctite
14 Nm (10.3 lbf ft)
Loctite
.
®
243™
®
243™
Advertisement
Table of Contents
