KTM 150 XC-W 2018 Owner's Manual page 87

–
Move the clutch fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
–
Remove cover
E00780-10
–
Fill bleeding syringe
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove bleeder screw
mount bleeding syringe
E00338-10
–
Now inject the fluid into the system until it emerges from drill
hole 6 of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
E00781-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
12 SERVICE WORK ON THE CHASSIS
1 .
2 3
with membrane .
4
with the appropriate hydraulic fluid.
p. 151)
4
.
4 mm (0.16 in)
5 and
85