6
CONTROLS
6.5
Kill switch (All XC-W models)
6.6
Horn button (All EXC models)
6.7
Light switch (All EXC models)
6.8
Light switch (All XC-W models)
6.9
Turn signal switch (All EXC models)
The kill switch
Possible states
•
Kill switch
the engine can be started.
•
Kill switch
ning engine stops, and a non-running engine will not start.
B01144-10
The horn button
Possible states
•
Horn button
•
Horn button
B01585-11
The light switch
Possible states
B01585-12
The light switch
Possible states
Light off – Light switch is pressed in up to the stop. In this position, the light is
•
switched off.
Light on – Light switch is pulled out to the stop. In this position, the low beam
•
and tail light are switched on.
602727-10
Turn signal switch
Possible states
101633-10
is fitted on the left side of the handlebar.
1
in basic position – In this position, the ignition circuit is closed and
pressed – In this position, the ignition circuit is interrupted, a run-
is fitted on the left side of the handlebar.
1
in neutral position
pressed – The horn is operated in this position.
is fitted on the left side of the handlebar.
1
Light off – Light switch is turned to the right. In this position, the light
is switched off.
Low beam on – Light switch is in the central position. In this position,
the low beam and tail light are switched on.
High beam on – Light switch is turned to the left. In this position, the
high beam and the tail light are switched on.
is on the right of the speedometer.
1
is fitted on the left side of the handlebar.
1
Turn signal off – The turn signal switch is in the central position.
Left turn signal, on – The turn signal switch is turned to the left.
Right turn signal, on – The turn signal switch is turned to the right.
14