18 SERVICE WORK ON THE ENGINE
18.4
130
Adding gear oil
Info
Too little gear oil or poor-quality gear oil results in premature wear to the transmission.
Gear oil must only be topped up when the engine is cold.
E00791-10
401955-11
E00790-10
Preparatory work
–
Park the motorcycle on a level surface.
Main work
(125 XC‑W EU)
–
Remove screw for checking gear oil level
–
2
Remove filler plug
–
Add gear oil until it emerges from the drill hole of the gear
oil monitoring screw.
Engine oil (15W/50) (
–
Mount and tighten the gear oil monitoring screw.
Guideline
Screw, gear oil level
check
–
Mount and tighten filler plug
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system
when starting or running the engine in an
enclosed space.
–
Start the engine and check that it is oil-tight.
(150 XC‑W US)
–
Remove screw for checking gear oil level
1
.
.
p. 151)
M6
8 Nm (5.9 lbf ft)
2
.
1
.