KTM 150 XC-W 2018 Owner's Manual page 59

–
Remove screws
the handlebar and lay it to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
–
Place the handlebar supports in the required position. Mount
and tighten screws
Guideline
Screw, handle-
bar support
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
M00993-11 Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount screws
evenly.
Guideline
Screw, handlebar
clamp
Info
Make sure the gap widths are even.
11 TUNING THE CHASSIS
1
. Take off the handlebar clamps. Remove
2
. Take off the handlebar supports.
2
.
M10 40 Nm (29.5 lbf ft)
M8 20 Nm (14.8 lbf ft)
Loctite ® 243™
1
and tighten
57