Kill Switch (All Xc-W Models); Horn Button (All Exc Models); Light Switch (All Exc Models); Light Switch (All Xc-W Models) - KTM 300 EXC Owner's Manual

6 CONTROLS
6.5

Kill switch (All XC-W models)

6.6

Horn button (All EXC models)

6.7

Light switch (All EXC models)

6.8

Light switch (All XC-W models)

6.9

Turn signal switch (All EXC models)

The kill switch
Possible states
• Kill switch
the engine can be started.
• Kill switch
ning engine stops, and a non-running engine will not start.
B01144-10
The horn button
Possible states
• Horn button in neutral position
Horn button pressed – The horn is operated in this position.
•
102044-11
The light switch
Possible states
102045-10
The light switch
Possible states
Light off – Light switch is pressed in up to the stop. In this position, the light is
•
switched off.
Light on – Light switch is pulled out to the stop. In this position, the low beam
•
and tail light are switched on.
102047-10
Turn signal switch
Possible states
102044-12

is fitted on the left side of the handlebar.
in basic position – In this position, the ignition circuit is closed and
pressed – In this position, the ignition circuit is interrupted, a run-
 is fitted on the left side of the handlebar.

is fitted on the left side of the handlebar.
Low beam on – Light switch is in the central position. In this position,
the low beam and tail light are switched on.
High beam on – Light switch is turned to the left. In this position, the
high beam and the tail light are switched on.
 is on the right of the speedometer.

is fitted on the left side of the handlebar.
Turn signal off – The turn signal switch is in the central position.
Left turn signal, on – The turn signal switch is turned to the left.
Right turn signal, on – The turn signal switch is turned to the right.
14