Empty Key - Mitel 6940w User Manual

C S
ONFIGURING OFTKEYS
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1 through Key 48 on the Top keys.orSelect from Key 1 through Key 30 on the Bottom
2.
keys.
In the Type field, select Call History.
3.
In the Label field, enter a label to display on the phone for the key (default is "Call History").
4.
Click Save Settings.
5.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
6.
In the Type field, select Call History.
7.
In the Label field, enter a label to display on the phone for the key (default is "Call History").
8.
Click Save Settings.
9.

Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this by
setting the softkey to Empty. The keys are added in order (from key 1 to Key 30 [bottom] or Key 48 [top])
after any hard-coded keys have been added. If a particular key is not defined, it is ignored.
E K
MPTY EY
142