Automatic Hold; Retrieving A Held Call; Transferring Calls; Blind Transfer - Mitel 6940w User Manual

H C
ANDLING ALLS

Automatic Hold

When juggling between calls, you do not have to press the
The phone automatically puts your current call on hold as soon as you press a new line/call appearance
button.

Retrieving a Held Call

If you have more than one call on hold, you can reconnect to a held call by pressing the line/call appear-
ance button where that call is being held or by navigating to the call on the Line Selection or any
Callscreen and pressing
or Pickup softkey. Press
If an attempt to retrieve a held call fails, the 6940 displays a "Server Error" message and error reason
code on screen (e.g. "Server Error: 408" for a Request Timeout or "Server Error: 503" for a Service
Unavailable). You can disconnect the call on hold by pressing the
A call on hold can be disconnected by pressing the
The line with the call on hold is the line in focus.
•
You have attempted to retrieve the call on hold by navigating to the call on the Line Selection or any
•
Callscreen and pressing the
The attempt to retrieve the call on hold failed due to a 408, 5xx, or 6xx reason code. If the attempt failed
•
due to a different server error reason, pressing the
This behavior is applicable to all call-on-hold scenarios such as single point-to-point calls, conference
calls, and any transfer scenarios. In an attended transfer scenario, pressing the
retrieval attempt (that meets the above three conditions) will disconnect the call on hold instead of
launching the transfer.

Transferring Calls

You can use the Xfer softkey offered on screen when in a connected call to transfer calls or use a softkey
configured with Transfer functionality (see

Blind Transfer

A blind transfer is when you transfer a call directly to another extension without consulting with the person
receiving the call. To do this, simply complete the transfer immediately after you have entered the number.
The call goes directly to the extension or outside line you transferred to.
or the Drop softkey to disconnect the call.
or Pickupsoftkey.
"Transfer Key"
button to go from one call to the next.
key in certain circumstances.
key only when these three conditions are met:
key will not disconnect the call.
on
page 131).
T C
RANSFERRING ALLS
key after a failed
159