Speed Dial/Xfer; Speed Dial/Xfer Key Requirements And Functionality; Configuring A Speed Dial/Xfer Key Using The Mitel Web Ui - Mitel 6940w User Manual

C S
ONFIGURING OFTKEYS
Click Save Settings.
10.

Speed Dial/Xfer

TheSpeed Dial key allows a number to be dialed quickly by pressing one key configured for speed
dialing. TheTransfer key allows a call to be transferred to other recipients blindly or consultatively. The
Speed Dial/Xfer key combines the Speed Dial and Transferkeys' functionality together allowing the user
to transfer calls or speed dial with one key.
: It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using
NOTE
the Speed Dial/Xfer feature. For more information about this parameter, see
Line" on page 210 .

Speed Dial/Xfer Key Requirements and Functionality

The Speed Dial/Xfer key has the following capabilities:
Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key
•
causes the phone to go offhook and dial the predefined extension.
Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed
•
Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call (get the
call back) by pressing the line key again.
Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed
•
Dial/Xfer key forwards the call to the predefined extension.

Configuring a Speed Dial/Xfer Key Using the Mitel Web UI

Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
1.
Softkeys
Select from Key 1 through Key 48 on the Top keys.orSelect from Key 1 through Key 30 on the Bottom
2.
keys.
In the Type field, select Speed Dial/Xfer.
3.
S D
PEED
"Switch UI Focus to Ringing
/X
IAL FER
126