Mitel 6940w User Manual page 118

C S
ONFIGURING OFTKEYS
:
NOTE
When creating a Speed Dial key from the IP phone UI, you must select a softkey, dialpad key, or
1.
expansion module key that has no preassigned function (key must be set to None or Empty).
If there are no empty softkeys on the home screen, you can press and hold the More softkey to
2.
configure the next available softkey with speeddial functionality. If a More softkey is not available, use
the Dialing > Speed Dial Edit option in the Options List to configure a new speeddial key.
Press and hold an non-configured softkey, dialpad key, or expansion module key for three seconds.
1.
: You can press the Cancel softkey at any time during the speed dial programming to cancel
NOTE
and not save the speed dial information.
In the Label field (if applicable), enter a label to apply to the key.
2.
In the Number field (if applicable) enter a number for the speed dial key using the on-screen
3.
keyboards.
S D K
PEED IAL EY
107