Dell PowerEdge HS5620 Installation And Service Manual page 104

Table 75. Cable routing - 8 x 2.5-inch SAS/SATA backplane configuration with rear mounted fPERC
(PERC 11) and riser 1C
From
BP_PWR_1 (power connector on backplane)
CTRL_DST_PA1 (signal connector on PERC)
SYS_PWR_0 (power connector on system board)
SL9_CPU2_PB5 (signal connector on system board)
SL10_CPU2_PA5 (signal connector on system board)
SL11_CPU1_PA6 (signal connector on system board)
SL12_CPU1_PB6 (signal connector on system board)
FAN_SIG (Fan signal cable on fan board)
SYS_PWR2 (power connector on system board)
FAN_PWR (power connector on fan board)
SYS_PWR1 (power connector on system board)
Figure 66. Cabling diagram of configuration 7 - 8 x 2.5-inch NVMe RAID with single, and dual processor
configuration with rear mounted fPERC (PERC11)
Table 76. Cable routing - 8 x 2.5-inch NVMe RAID with single, and dual processor configuration with rear
mounted fPERC (PERC11)
From
CTRL_SRC_PB1 (signal connector on PERC)
CTRL_SRC_PA1 (signal connector on PERC)
CTRL_DST_PA1 (signal connector on PERC)
BP_PWR_1 (power connector on the backplane)
FAN_SIG (Fan signal cable on fan board)
104 Installing and removing system components
To
SIG_PWR_1 (Power connector on the PIB)
SL5_CPU1_PA3 (signal connector on system board)
Power connector soldered on riser
Signal connector soldered on riser
Signal connector soldered on riser
Signal connector soldered on riser
Signal connector soldered on riser
FAN_SIG_1, FAN_SIG_2 (fan signal cable on system board)
CPU_PWR2 (power connector on PIB)
FAN_PWR1 (power connector on PIB)
SYS_PWR1_1 , SYS_PWR1_2 (power connectors on PIB)
To
BP_DST_PA2 (signal connector on PERC)
BP_DST_PB2 (signal connector on PERC)
BP_DST_PA1 (signal connector on PERC)
BP_DST_PB1 (signal connector on PERC)
SL5_CPU1_PA3 (signal connector on system board)
SIG_PWR_1 (power connector on the PIB)
FAN_SIG_1, FAN_SIG_2 (fan signal cable on system board)