Table of Contents
Advertisement
Figure 8. Left control panel with optional iDRAC Quick Sync 2 indicator
Table 4. Left control panel with optional iDRAC Quick Sync 2 indicator
Item
Indicator, button, or
connector
1
Status LED indicators
2
System health and system
ID indicator
3
iDRAC Quick Sync
2 wireless indicator
(optional)
NOTE:
For more information about the indicator codes, see the
Right control panel view
Figure 9. Right control panel
Icon
Description
N/A
Indicates the status of the system. For more information, see the
Status LED indicators
Indicates the system health. For more information, see the
System health and system ID indicator codes
Indicates if the iDRAC Quick Sync 2 wireless option is
activated. The Quick Sync 2 feature allows management of the
system using mobile devices. This feature aggregates hardware/
firmware inventory and various system level diagnostic/error
information that can be used in troubleshooting the system. You
can access system inventory, Dell Lifecycle Controller logs or
system logs, system health status, and also configure iDRAC,
BIOS, and networking parameters. You can also launch the virtual
Keyboard, Video, and Mouse (KVM) viewer and virtual Kernel-
based Virtual Machine (KVM), on a supported mobile device.
For more information, see the Integrated Dell Remote Access
Controller User's Guide at www.dell.com/poweredgemanuals.
section.
System diagnostics and indicator codes
Dell PowerEdge HS5620 system overview
section.
section.
13
Advertisement
Table of Contents
