Dell PowerEdge HS5620 Installation And Service Manual page 102

Figure 63. Cabling diagram of configuration 4 - 8 x 3.5-inch SAS/SATA backplane with single, and dual processor
configuration with front mounted fPERC (PERC11)
Table 73. Cable routing - 8 x 3.5-inch SAS/SATA backplane with single, and dual processor configuration
with front mounted fPERC (PERC11)
From
CTRL_DST_PA1 (Signal connector on the front PERC)
BP_PWR_1 (power connector on the backplane)
FAN_SIG (Fan signal cable on fan board)
SYS_PWR2 (power connector on system board)
FAN_PWR (power connector on fan board)
SYS_PWR1 (power connector on system board)
102 Installing and removing system components
To
SL5_CPU1_PA3 (signal connector on system board)
SIG_PWR_1 (power connector on the PIB)
FAN_SIG_1, FAN_SIG_2 (fan signal cable on system board)
CPU_PWR2 (power connector on PIB)
FAN_PWR1 (power connector on PIB)
SYS_PWR1_1 , SYS_PWR1_2 (power connectors on PIB)