Table of Contents
Advertisement
Comply with the following safety instructions:
In addition to the specified personal protection gear, also wear suitable protective gloves and
safety glasses.
Comply with the instructions on the rating plates attached to the geared motor. The rating
plates must be kept free from paint and dirt at all times. Replace any missing rating plates.
Collect and dispose of used oil in accordance with regulations. Immediately remove any spilt
oil with an oil-binding agent.
Do not use high-pressure cleaning equipment or sharp-edged tools to clean the geared motor.
The machine OEM who installs the geared motors in a plant must include the regulations
contained in these operating instructions in its own operating instructions.
During operation, comply with the vibration levels according to ISO 20816‑1. Maximum
permissible vibration values can be found in Installation notes (Page 26).
Motors for mounting onto SIMOGEAR gearboxes
Operating Instructions, 01/2024, A5E53220841A/RS-AA
3.4 Specific hazard types and fundamental obligations
Specific safety instructions
29
Advertisement
Table of Contents
