Safety Instructions For Combi-Disc - HE-VA Combi-Disc Series Operating Instructions Manual

Table of Contents

Advertisement

Safety instructions for Combi-Disc.

Do not start-up the machine if there are persons in exposed positions* within a hazardous area **
Persons in exposed positions: Any person who is wholly or partly within a hazardous area.
Hazardous area: On and under the machine within a distance of 10 m from the machine.
*
Persons in exposed positions: Any person who is wholly or partly within a hazardous
area.
**
Hazardous area: On and under the machine within a distance of 4 m from the machine
When persons are in exposed positions (e.g. in connection with adjustment, maintenance,
attachment and
uncoupling), the following conditions must be observed:
1. The machine must be lowered to firm ground.
2. The hydraulics must be relieved.
3. The tractor must be stopped and the key removed from the ignition switch.
4. The driver must ensure that no persons are in exposed positions during the operation.
Most accidents that happen in connection with the operation, transport and maintenance of
machines are
caused by non-compliance with the most elementary safety conditions.
Therefore it is vital that anybody working at the machine carefully complies with the safety
instructions
as well as other instructions applying to the machine.
The machine may only be operated, maintained and repaired by persons, who are familiar with this
work
and who are further familiar with the possible elements of danger with this particular machine.
CAREFUL! Rotating parts and loose-fitting clothing make up a dangerous combination!
Due to the risk of falling down, it is extremely hazardous to stand on the machine
frame during operation of the machine attached to a tractor.
IMPORTANT!
Due to the risk of falling down, it is extremely hazardous to stand on the
machine frame during operation of the machine attached to a tractor.
Combi-Disc
11
01/08 -2015

Advertisement

Table of Contents
loading

This manual is also suitable for:

Combi-disc 4.0 mCombi-disc 3.0 mCombi-disc 3.5 mCombi-disc

Table of Contents