Smb - Xerox ApeosPort C6550 I Network Administrator's Manual

SMB

This section describes the settings for SMB.
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the web browser, and press the <Enter> key.
Example of the IP address entry
http://192.168.1.1/
Example of the Internet address entry
http://xxx.yyyy.zz.vvv/
Note
3
Click the [Properties] tab.
4
Click [+] on the left of [Protocol Settings] to display the items in the folder.
5
Click [SMB].
6
Set [Workgroup].
7
Set [Host Name].
8
Set the [Maximum Session Number].
9
Select the [Enable] check box to enable the [TBCP Filter].
Note
10
Select the [Enable] check box to enable [Unicode Support].
11
Select the [On] check box when using [Auto Master Mode].
12
Select the [On] check box when using [Encrypt Password].
13
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator UserID and password into [User Name] and
[Password], and then click [OK].
Note
Network Setting Items (Port/Protocol) for CentreWare Internet Services
• When specifying a port number, add ":" and a port number to the end of the Internet address.
• The TBCP filter is set only when an optional PostScript3 kit is connected.
• The default UserID is "11111" and password is "x-admin".
9
61