Xerox ApeosPort C6550 I Network Administrator's Manual page 13

No. Component
1 Duplex automatic
document feeder (250
sheets)
2 Document glass
3 Control panel
4 Power switch
5 Toner cover
6 Front cover
7 Tray 1, 2, 3, 4
8 Bottom left cover
9 Locking casters
10 Tray 6 (optional)
11 Tray 6 top cover
12 Tray 5 (Bypass)
13 Tray 5 (bypass) top cover
14 USB2.0 interface connector
(optional)
15 Ethernet 10Base-T /
100Base-TX connector
This automatically feeds 2 sided originals from a stack.
Load documents here.
It consists of operation buttons, LED indicators and a touch screen.
Refer to "Control Panel" (P.23).
Switches the power of the machine on/off.
Open this cover to access the insides of the machine to replace the
toner cartridge.
Open this cover to access the insides of the machine to clear paper
jams or replace consumables.
Load papers here.
Open this cover to access the insides of the machine to clear paper
jams.
If the Tray 6 is installed in the machine, move the Tray 6 to the left first.
Used for locking the wheels of the machine. Lock these casters after
moving the machine to its installation site.
Load papers here.
Move the Tray 6 to the left and then open the top cover to clear paper
jams.
Used for loading non-standard paper (thick-stock paper, and other
special media) that cannot be loaded in the Trays 1 to 4, and 6.
Open this cover to access the insides of the machine to clear paper
jams.
Use to connect a USB cable.
Use to connect a network cable.
Machine Components
Function
2
11