Quick Install Steps (Smb Protocol); Quick Install Steps (Appletalk Protocol) - Windows 2000 Only - Xerox 1235/DX - Phaser Color Laser Printer Network Manual

Quick install steps (SMB protocol)

1. Type your printer's IP Address in your web browser.
Select Properties to view and set properties.
2.
3. In the tree to the left, expand the Protocols folder by clicking the +
sign.
4. Select SMB TCP/IP; the SMB over TCP/IP dialog box should
appear.
Make sure that Enable is check-marked.
5.
6. Enter Server Name, Workgroup, and Auto Config information.
7. Press the Apply New Properties button.
8. Restart your printer.
9. Use Network Neighborhood to find your printer with the
Workgroup you entered in Step 6. Look for a PC icon with the
Server Name you entered in Step 6.
10.
Double-click the PC icon found in Step 9.
11. Right-click the Shared Network Printer icon (icon with a printer
and a LAN wire below it). Select Connect from the menu.
12. If the printer driver was not previously installed on your
workstation, follow the instructions in the Add Printer Wizard to
install the driver.
Quick install steps (AppleTalk protocol) —
Windows 2000 only
1. At the Desktop, right-mouse-click the My Network Place icon and
select Properties.
2. Right-click the Local Area Connection icon inside the Network
and Dial-up Connections window. Select Properties.
3. Select the General tab, and verify that AppleTalk Protocol is
loaded.
4. If the AppleTalk software is not present, install it using the
documentation provided by Microsoft. Then return to this
document.
5. Open the Control Panel and double-click the Printers icon.
6. Double-click Add Printer; the Add printer Wizard starts.