Table of Contents
Advertisement
11 Using Scan Service
6
Configuration on a Computer
11
100
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings].
2) Enter the System Administrator UserID and password into [User Name] and
[Password], and click [OK].
Note
• The default User ID is "11111" and the default password is "x-admin".
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.
The following describes the configuration for a computer.
For information about the computer configuration procedure, refer to Operating
Environment in CentreWare Scan Service (separately sold), and for information about
the installation procedure, refer to CentreWare Scan Service Installation Guide.
Advertisement
Table of Contents
