Tcp/Ip - Xerox ApeosPort C6550 I Network Administrator's Manual

Table of Contents

Advertisement

9 Using CentreWare Internet Services

TCP/IP

1
2
3
4
5
6
7
8
9
9
10
64
This section describes the settings for TCP/IP.
Start a web browser.
Enter the machine's IP address or the Internet address to the address entry column on
the browser, and press the "Enter" key.
Example of the IP address entry
http://192.168.1.1/
Example of the Internet address entry
http://xxx.yyyy.zz.vvv/
Note
• When specifying a port number, add ":" and a port number to the end of the Internet address.
Click the [Properties] tab.
Click [+] on the left of [Protocol Settings] to display the items in the folder.
Click [TCP/IP].
Set [Host Name].
Select how to obtain an IP address from the [Get IP Address] pull-down menu.
Set [IP Address].
Note
• This item is not necessary if either [DHCP], [BOOTP], [RARP], or [DHCP/Autonet] has been
selected from the [Get IP Address] pull-down menu.
Set [Subnet Mask] and [Gateway Address].
Note
• This item is not necessary if either [DHCP], [BOOTP], [RARP], or [DHCP/Autonet] has been
selected from the [Get IP Address] pull-down menu.
Set the DNS information.
1) Select the [DHCP] check box if using DHCP for [Get DNS Address].
2) Set [DNS Address 1 - 3].
Note
• This item is not necessary if [DHCP] has been specified for [Method to Get the DNS
Address].
3) Set [DNS Name].
4) Select the [On] check box when using [Generate Domain Search List
Automatically].

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apeosport c5540 iDocucentre c6550 iDocucentre c5540 i

Table of Contents