Table of Contents
Advertisement
Installation instructions
Connection of the equipment
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
2
4
3
6
10
Hot water outlet
Alternative location of detergent equipment
Hole ø 25 mm for hose intended for detergent in solid form
Hole ø 19 mm for drying agent hose
Plugged connection ø 18 mm for connecting hose for detergent in solid
form
Drying agent dosage outlet
Plugged connection in the chemical wash tank ø 11 mm for liquid detergent
Plugged connection for measuring cell for measuring the detergent con-
centration in the chemical wash tank. The measuring cell is connected in
the junction box (10).
"DETERGENT" adhesive label. The label is affixed to the inside rear wall
of the chemical wash tank and indicates the alternative position of the de-
tergent opening. Drill a hole from the back of the chemical tank through the
plugged hole in the rear cover plate.
Junction box with connections for detergent and drying agent.
WD-11
touch
1
8
7
5
16
Rev. 00 (202310)
9
WD11t_05
Advertisement
Table of Contents
