Mitsubishi Electric FR-A820-04750-GF Instruction Manual page 100

FR-A800/A800 Plus Series
Instruction Manual Supplement
1
Monitoring terminals S1 and S2 (FR Configurator2)
Graph display using FR Configurator2 is supported for terminals S1 and S2 (data from the high speed sampling and
the USB trace file).
The state of terminals S1 and S2 can be displayed in graph form using FR Configurator2.
The FR Configurator2 version 1.28E or later supports graph display for terminals S1 and S2.
For details on FR Configurator2, refer to the FR Configurator2 Instruction Manual.
 Digital source (monitor item) selection
• Terminals S1 and S2 can be selected as digital sources for the trace function.
• Select the digital sources (input/output signals) to be set to Pr.1038 to Pr.1045 from the following table. When a
value other than the ones in the following table is set, "0" (OFF) is applied for indication.
Setting Signal
value name
1 STF
2 STR
3 AU
4 RT
5 RL
6 RM
7 RH
8 JOG
9 MRS
10 STP(STOP)
11 RES
12 CS
15 S2
16 S1
2
Note for use with the Type E combination motor
controller
When Appendix "Instructions for UL and cUL" in the Instruction Manual (Startup) mentions the Type E combination
motor controller, only the MMP-T series controllers with the UL mark affixed are applicable for certification.
Setting Signal
value name
21 X0
22 X1
23 X2
24 X3
25 X4
26 X5
27 X6
28 X7
29 X8
30 X9
31 X10
32 X11
33 X12
34 X13
35 X14
36 X15
37 DY
Setting Signal
value name
101 RUN
102 SU
103 IPF
104 OL
105 FU
106 ABC1
107 ABC2
121 DO0
122 DO1
123 DO2
124 DO3
125 DO4
126 DO5
127 DO6
128 RA1
129 RA2
130 RA3
1 BCN-C22005-980