Piston And/Or Seal And Spacer Kit Replacement - Pentair FLECK 9000 SXT Installer Manual

Installer Manual Fleck 9000 - SXT - Maintenance

9.2.4. Piston and/or seal and spacer kit replacement

9.2.4.1 Special tools needed
1
Item Part number
1 13061
2 11098
9.2.4.2 Upper piston and/or seal and spacer kit replacement
Caution
Use only approved silicone grease or soapy water.
No.
A Remove the power head, see "Power head disassembly/replacement", page 68.
B Using pliers, remove the piston (2).
C Remove the cover cup (1) from the piston (2).
D Using a small hook, remove a seal (3).
E Using the puller, remove a spacer (4).
F Repeat D and E for all the seals and spacers.
G Lubricate all seals (3) with approved lubricant only.
H Put back a new seal (3) using the stuffer.
I Put back a spacer (4) using the stuffer.
J Repeat H and I for all the seals and spacers.
K Lubricate the piston (2) with approved lubricant only.
L Put back the piston (2).
M Put back the cover cup (1).
N Rebuild the power head, see "Power head disassembly/replacement", page 68.
70 / 108
2
Puller
Stuffer
Operation
Description
Ref. MKT-IM-020 / B - 08.06.2018
Packaging
quantity
1
1