Replacing Piston And/Or Seal And Spacer Kit - Pentair FLECK 9100 SXT Installer Manual

Installer Manual Fleck 9100 - SXT - Maintenance

9.2.4. Replacing piston and/or seal and spacer kit

9.2.4.1 Special tools needed
1
Item Part number
1 13061
2 11098
9.2.4.2 Replacing the upper piston and/or its seal and spacer kit
Caution
Use only approved silicon grease or soapy water.
No.
A Remove the gearing system, see "Replacing the micro-switches", page 75.
B Using pliers, remove the piston (2).
C Remove the cover cup (1) from the piston (2).
D Using a small hook, remove a seal (3).
E Using the puller, remove a spacer (4).
F Repeat D and E for all the seals and spacers.
G Lubricate all seals (3) with approved lubricant only.
H Put back a new seal (3) using the stuffer.
I Put back a spacer (4) using the stuffer.
J Repeat H and I for all the seals and spacers.
K Lubricate the piston (2) with approved lubricant only.
L Put back the piston (2).
M Put back the cover cup (1).
N Rebuild the gearing system, see "Replacing the micro-switches", page 75.
62 / 94
2
Puller
Stuffer
Operation
Description
Ref. MKT-IM-004 / A - 27.10.2016
Packaging
quantity
1
1