Transmitter Settings; Receiver Preparation; Battery Insertion And Replacement - Dog trace d-control professional 1000 mini Manual

Electronic training collar
Table of Contents

Advertisement

6.3 Transmitter settings

1. Switching ON/OFF – press down for 1 second the button
2. Selection of function button for setting – by pushing this button
and repeteadly you switch between buttons A1/A2/B1/B2.
Buttons A1/A2 are designed for a dog A and buttons B1/B2 are designed for a dog B.
TIP: When using the device for training one dog, you can program function
buttons B1/B2 with the same receiver (collar) as function buttons A1/A2 -
see chapter 7.4 Pairing (programming) function buttons B1/B2 (or second
transmitter) with the first receiver.
3. Command setting – by pressing down
for the selected function button A1/A2/B1/B2. Selected command will be sent to
the receiver collar. You can select following commands:
continous stimulation and short nick stimulation, vibration, light, beep and
external device.
4. Mode and stimulation level setting – use
setting or for mode setting.
5. Locking of selected function and command – by pushing
continously, the selected button function will be locked. Locked mode is indicated
by this symbol
set only level of a current selected function button. By pressing following symbol
continously you can open transmitter setting again.
7

7.1 Battery insertion and replacement

1. Screw out 4 screws from the battery cover using a cross-head screwdriver and
remove the lid.
2. Insert the lithium CR2 3V battery into the battery compartment with a correct
polarity (according to the polarity indicated with the "+" symbol in the battery
compartment – see the Fig.). A wrong polarity may damage the unit.
When you insert the battery for the first time, or if the battery is removed longer than
a few tens of minutes (approximately 20 minutes), you will hear an audible beep tone
indicating the correct installation of the battery.
26
on the screen. After you have locked those buttons, you can

RECEIVER PREPARATION

Battery polarity indicator
.
button you can choose a command
buttons for impulse intensity
Battery polarity indicator
shortly
button

Advertisement

Table of Contents
loading

Table of Contents