TOHATSU EverRun MX 15E2 Owner's Manual page 25

For engine oil and gasoline mixing ratio,
refer to table in previous page.
When portable fuel tank is used for
operation of outboard motor(s):
1
Pour engine oil into fuel tank, and
then, gasoline.
2
Put cap on the tank, and close tightly.
3
Close air vent plug tightly.
ENOW00938-0
WARNING
Loose cap or air vent plug can cause leak of
fuel.
4
Shake the tank to mix engine oil and
gasoline well.
For boat with built in fuel tank:
1
Prepare separate fuel container for
pre-mixing.
ENOF01709-0
PRE-OPERATING PREPARATIONS
2
Pour engine oil into fuel container, and
then, gasoline.
3
Put cap on the container, and close
tightly.
4
Shake the container to mix engine oil
and gasoline well.
5
Pour the fuel into fuel tank.
ENON00922-1
Notes
It is recommended to pre-mix by using
separate fuel container. Avoid mixing
the oil and gasoline in the built in fuel
tank on the boat.
If mixing in built-in fuel tank on the
boat, allow it to mix well by pouring
engine oil into the tank little by little
while pouring gasoline into the tank.
25
6