Table of Contents
Advertisement
2. Disconnect the linkage of the starter
lock rod.
3. Remove the bolts (3pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope clockwise around
the flywheel several turns.
5. Tie a loop to the other end of the
emergency starter rope and attach
socket wrench that is included in the
tool kit.
ENOW00860-0
Be sure to keep the harness away from the
rotation parts.
6. Be sure to install the stop switch lock
ENOF01717-0
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
7. Set the shift lever in the Neutral posi-
tion.
8. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance, then pull it
quickly.
ENOF01817-0
9. Once the outboard motor is started,
do not reinstall recoil starter and top
cowl.
ENOF01719-0
ENGINE OPERATION
CAUTION
ENOF01720-0
31
7
Advertisement
Table of Contents
