Table of Contents
Advertisement
12
. Maintenance
12.1
Firmware update
The firmware of MiniLEDko Spot can be updates through the RDM protocol (ANSI E1.20). Contact
Coemar assistance to receive the software and the device updater (AC10011A000).
12.2
Periodic cleaning
Lenses
Even a thin layer of dust can reduce the luminous output and alter the consistency of the beam.
Regularly clean all filters and lenses using a soft cotton cloth, dampened with a special lens
cleaning solution.
Cleaning of the unit
Use a soft brush or a common vacuum cleaner or a source of compressed air for removing dust.
For the cleaning of the housing use a soft cloth and a non-aggressive cleaner. Check that the
internal fans and heat exchanger must be perfectly clean.
12.3
Periodic controls
Mechanical components
Check the correct working of the mechanical parts and, if needed, replace them. Make sure the
projector is not mechanically damaged. If necessary, replace the worn parts.
Electrical components
Check all electrical connections, in particular for correct grounding and correct attachment of all
extractable connectors. Press the connectors if necessary and reposition as before.
User Manual 2023
28
coemar.com
Advertisement
Table of Contents
