Seagull Models MESSERSCHMITT Bf 109E 60 Assembly Manual page 30

Messerschmitt Bf 109E 60
INSTALLATION PILOT AND CANOPY.
Locate items necessary to install pilot,
seats.
A scale pilot is included with this ARF.
he Pilot included itting well to the
cockpit. (or you can order others scale
pilot igures made by SG Models. hey
are available at SG Models distributors.)
If you are going to install a pilot igure,
.
please use a sanding bar to sand the base
of the igure so that it is lat.
Position the pilot igure on the can
opy loor as shown. Use epoxy to glue
the base of the pilot igure to the cockpit
loor, please see pictures as shown.
30
Epoxy.
Position the canopy onto the fuselage.
Trace around the canopy and onto the fu-
selage using a felt-tipped pen. Carefully
cut and remove covering material from
the fuselage where the canopy makes
contact, exposing the bare wood. hen
permanently glue the canopy in place
with epoxy glue or special "canopy glue".
-
Instruction Manual.
85mm
Epoxy.