TOHATSU EverRun MX 40D3 Owner's Manual page 34

34
ENGINE OPERATION
(For manual starter type)
4. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it
quickly. Repeat the procedure until
the outboard motor is started.
1. Slowly
2. Quickly
3. Starter handle
7
(For electrical starter type)
4. Push the starter switch button and
release the button when the engine
has started.
5. Return the choke knob fully after
engine has started.
1 2
3
ENOF00519-0
ENOF01910-1
6. Make sure that water is being dis-
charged from cooling water check
port.
2
1. Cooling water check port
2. Idle port
ENOM00042-F
Emergency starting
ENOW00099-1
WARNING
When the emergency starter rope is used for
starting engine;
Start in gear protection does not work.
Make sure that shift is in neutral position.
If the gear is in Forward or Reverse, the
boat can start moving immediately and
may lead to accident and personal injury.
Be careful that of your clothes or other
items do not to get caught in the rotating
parts.
To prevent accident and injury by rotating
parts, do not re-attach flywheel cover
and the top cowl after the engine has
been started.
Do not pull starter rope if any bystander is
around.
Attach engine stop switch lanyard to
clothing or any part of body such as wrist,
arm before starting engine the outboard
motor.
1. Remove the top cowl.
1
ENOF01911-0